SAVAGE C-STAND with GRIP ARM KIT

$259.95

#CSS-200S

The Savage 40″ (102cm) Stainless Steel C-Stand with Grip Arm Kit is a full suite production solution! A patent pending junior receiver on the lowest leg gives this stand a leg up from the competition. This feature allows users to place a second light or modifier low to the ground, and position the stand into a corner for optimal output in compact spaces. Do more with less gear in the way!

An included 20″ (51cm) riser with junior to baby pin stores away onto the side of the 40″ riser when not in use, and can be mounted into the leg’s junior receiver for double action. Mount two lights or one light and a scrim onto both risers to get maximum use from one C-stand. Remove the junior to baby pin from the 20″ riser and drop into the leg junior receiver for ultra-low positioning. Transfer the 40″ riser from the center to the leg junior receiver to move a light snugly into a corner. Adjust the 20″ riser through the foot of the leg to level the stand on stairs or uneven surfaces.

Fast-acting, foldable legs on a turtle base open/close and lock easily with a pull release knob.

Included in this C-stand kit is a 40″ (102cm) steel grip arm with an aluminum gobo head and our unique gobo clamp to more easily secure reflectors, scrims, flags and other accessories. The jaws of the gobo head can be clamped onto a variety of different objects from 8mm to 35mm wide.

Measuring at 9′ 6″ (2.9m) tall fully extended, this two riser stand is a heavy-duty stainless steel support that can secure up to a 25 lb. (11.33kg) load (more than the competition!) and handle rugged usage in the studio or on location.

Stand includes an adjustable hook for hanging cables and controllers (when mounted high on the column) or sandbags and ballasts (when mounted low) and can fold up alongside the riser when not in use.

Enjoy the convenience of a Rocky Mountain leg and turtle base in one stand.

Includes:

Removable stainless steel turtle base
40″ (102cm) Stainless steel double riser
20” (51cm) Stainless steel riser
Junior to baby pin
40” (102cm) Stainless steel grip arm
Aluminum gobo head
Aluminum gobo clamp
Removable hanging hook

Specs:
Anti-rust stainless steel
Removable turtle base
Junior receiver on leg allows for either included risers to be placed snug in a corner, or for low placement of a second light or modifier (patent pending feature!)
Leg leveler for uneven surfaces or stairs
Pull release knob locks legs into open or closed position
Dual baby pin mount possibilities
8mm – 35mm Gobo head clamping range
Gobo head clamps lined with EPDM rubber to prevent damage on thin walled tubes
Blue padded handle for comfortable grip
Maximum load: 25 lbs. (11.3kg)
Minimum working height: 53" (135cm)
Maximum working height: 114" (290cm)
Footprint: 25" (64cm)
Collapsed leg width: 22" (56cm)
Total weight: 24 lbs. (10.9kg)